1. Scraper chain conveyor should be no-load running for a certain time when start the equipment every time, Then feed the material after the equipment working normally. We should keep feeding the material evenly, sudden feeding or over-load running is not allowed.
2. Should not stop the machine with load if there is no special condition.
Generally,we should stop the equipment when the material in the trough were discharged completely after we stop feeding the material.
3. If the whole production line is consist of sets of conveyor, we should
start the last set first when start the whole system, then start the others one by one . The order will be opposite when stops.
2. Should not stop the machine with load if there is no special condition.
Generally,we should stop the equipment when the material in the trough were discharged completely after we stop feeding the material.
3. If the whole production line is consist of sets of conveyor, we should
start the last set first when start the whole system, then start the others one by one . The order will be opposite when stops.
5. During operating, we should protect the conveyor from the iron, large hard objects and impurities to avoid damage the equipment.
6. Should keep all the bearing and driven device lubricated well. However, should not lubricate the conveyor chain, support guide rail, head wheel and tail wheel etc.
7. In general, the buried scraper conveyor should be minor repair every half year, medium repair every year and overhaul every three years. For overhaul the buried scraper conveyor, we should remove and clean all the spare part, replace all the wear part. For the motor and reducer, should be maintained and repaired according to their technical requirement.
Further information please check: http://www.pkmachinery.com/faq/long-life-chain-trough-scraper-conveyor.html
没有评论:
发表评论