1. Selection of Scraper Conveyors Chain
On the basis of meeting the adaptability to material, the chain should be selected reasonably according to maximum working load.
1) Bush roller chain should not be used for dust conveying, and should be first selected to transport the material which is easy to float chain. But in general, die forging chain is used as the first choose.
2) Base on the assurance of maximum chain working load, in order to maximize its carrying capacity,
it is best to use the chains which allowable load is close to maximum working load.
3) On the condition of meeting strength requirement, it should be try to reduce chain weight.
4) Different kinds of chains are used for different arrangement form.
MS / MC / MG buried scraper conveyors: three types of chains can be used, bush roller chain, die forging chain and double chain.
MZ / MP buried scraper conveyors: die forging chain
MK / ML buried scraper conveyors: die forging chain and double chain
On the basis of meeting the adaptability to material, the chain should be selected reasonably according to maximum working load.
1) Bush roller chain should not be used for dust conveying, and should be first selected to transport the material which is easy to float chain. But in general, die forging chain is used as the first choose.
2) Base on the assurance of maximum chain working load, in order to maximize its carrying capacity,
it is best to use the chains which allowable load is close to maximum working load.
3) On the condition of meeting strength requirement, it should be try to reduce chain weight.
4) Different kinds of chains are used for different arrangement form.
MS / MC / MG buried scraper conveyors: three types of chains can be used, bush roller chain, die forging chain and double chain.
MZ / MP buried scraper conveyors: die forging chain
MK / ML buried scraper conveyors: die forging chain and double chain
The selection principle is to minimize the maximum dynamical load and up & down movement speed of chains. If the chain shake is too big, it will destroy normal material transportation, especially vertical conveying. And big dynamical load will lead to the increase of chain weight or decrease of its service life.
3. Selection of Scraper Pitch
The scraper pitch can be determined according to the conveyor trough width, but it must be adaptable to chain pitch. If the scraper pitch is too big, it can lead to relative slippage between various material layers in conveyor trough, so as to increase energy consumption and even destroy normal material transportation. On the contrary, too small scraper pitch will increase the traction weight and energy consumption.
The scraper pitch generally equals to chain pitch. When the load is small, the scraper pitch can be chosen the twice of chain pitch. Meanwhile the material features should be taken into consideration, for example, when conveying viscous material, the manufacturer can install a special form scraper, to remove the sticking of material inside conveyor trough, and prevent most viscous material bonded on the inner wall of conveyor trough.
没有评论:
发表评论