1.Vibrating feeder is used for batching and quantitative feeding material to ensure uniform feeding stability,horizontal installation should be adopted to prevent self flowing, declined10 degree installation should be adopted if there is continuous feeding, declined 15 degree installation can be adopted for viscous material and large water content material.
2 .After the installation, 20mm level lateral clearance should be left for vibrating feeder, suspension device should adopt flexible joint.
3. Before non-load test, please fix all bolts, especially the anchor bolt of vibration motor tighten the bolts again after continuous operation for 3-5 hours.
4. Two vibration motor must be reverse rotation when test run to check the current and noise stability, if any abnormal conditions, please stop the feeder and solve it timely.
5 Motor bearings should be lubricated every two month, for high temperature season bearings should fill the lubricating oil every month.
2 .After the installation, 20mm level lateral clearance should be left for vibrating feeder, suspension device should adopt flexible joint.
3. Before non-load test, please fix all bolts, especially the anchor bolt of vibration motor tighten the bolts again after continuous operation for 3-5 hours.
4. Two vibration motor must be reverse rotation when test run to check the current and noise stability, if any abnormal conditions, please stop the feeder and solve it timely.
5 Motor bearings should be lubricated every two month, for high temperature season bearings should fill the lubricating oil every month.
没有评论:
发表评论