Six factors influence screening efficiency of vibrating screen

Vibrating screen is one most important sieving equipment in mining, metallurgical, chemical and other industries In the actual operation, many factors may influence the screening efficiency, here PK Machinery will introduce as follows:
1. crackle occurs on the steel channel of motor bracket
In the process of running, the platform vibrates strongly which will directly cause a large secondary vibration in the process of running which will make steel channel of motor bracket crack.

 

2. weight deviation of vibrator eccentric
Vibrator eccentric is to make the vibrating screen vibrate, its weight directly affects the vibrating amplitude value, if there is eccentric weight deviation, the vibration force will be scattered at running time, which is directly reflected on the screen body, and the amplitudes inconformity of each part, it will cause vibration sieve connection parts or welding joint cracking.

 

3. severe wear and deformation of outlet lining plate.
From wear condition of outlet side plate, soil and ore residue mixed and harden, during start-up and running processing, the vibrating screen vibrates and tamps constantly, soil becomes hardening and causes the soil and side plate striking.
4. crackle occurs on side plate and reinforcing rib crack, and the length is different.
Soil stuck seriously inside the outlet side plate, when vibrating screen works, soil compaction, and there will be a huge impact contact generated between vibrating screen and screen base frame. At the same time, it also seriously affects the linear motion of vibrating screen.

 

5. damping spring failure.
After using for a long time, the spring will occur permanent deformation due to the rubber aging or long-term stress which lead to the spring failure and vibrating amplitude inconformity of each part, causing the vibrating screen connection parts or welding joint cracking.
6. misalignment of eccentric plumb line and natural plumb line.
When install an exciter, after connecting the universal shaft coupling and exciter well, there will be misalignment of eccentric plumb line and natural plumb line due to the influence of the driving shaft torque which leads to eccentric rotation out of sync, and the inconformity of amplitude of vibrating screen each part, causing the vibrating screen connection parts or welding joint cracking.