The lubrication requirement of driving device, please see the product manual that issued by the supplier.
Oil in proper amount of 2# lubricating grease between cross slide coupling intermediate plate and half-coupling when shut down the screw conveyor.
The bearings inside the tail and head end of bearing seats should be lubricated with 3# calcium base grease, and change the grease every month.
Oil in proper amount of 2# lubricating grease between cross slide coupling intermediate plate and half-coupling when shut down the screw conveyor.
The bearings inside the tail and head end of bearing seats should be lubricated with 3# calcium base grease, and change the grease every month.
The rolling bearing inside the hanging bearing should be lubricated with engine oil every week. Note: please not oil in lubricating grease to avoid squeezing the sealing ring outside the roiling ring away.
Above mentioned lubrication time is just the minimum requirements, detailed time should be flexible and depends on the operation condition.
List of Lubrication parts
| No. | Name of Lubrication part | Lubrication material | Lubrication part cycle | Lubrication method |
| 1 | Coupling | 2# lubricating grease | 1000 hours | Lubricator |
| 2 | Bearing seat | 3# calcium base grease | 1 month | Lubricator |
| 3 | Hanging bearing （Rolling bearing） | Engine oil | 1 week | Lubricator |
| 4 | Gearmotor | 00# lithium lubricating grease | 6 months | Lubricator |
没有评论:
发表评论