As we all know, there are many dangerous
factors may lead to losing your life for operation the coal mine conveyor, here
we introduce some measures and matters you should notice to avoid personal
injury:
1.When laying the conveyor belt ,please
pave it in strict accordance with the belt central line that production
department gives.
2. Belt conveyor components should be transported according to the order of tail frame, middle frame and the head frame, after transporting to the designated location, please put them away as per the transportation order along the roadway.
3. Belt conveyor should be installed according to the order of head frame, middle frame, the tail frame, central line of each pulley belt conveyor should be in a straight line.
4. Belt conveyor components should meet the requirements, the anchor bolt should be fixed and tighten reliably.
5.All sorts of protection device of belt after the installation is complete, please test each protection device to make sure they are and sensitive working in good condition.
6. Please set up a bridge for walking where people go cross the belt conveyor often.
7.The electric switch protection device must be completed which should be sensitive and reliable , 8. Both the head and tail section of belt conveyor must be equipped with two fire extinguishers and fire sand box which is not less than 0.2 m3.
9. Sweeper installation must meet the production needs. Sweeper and conveyor belt surface must contact well to ensure appropriate tightness and uniform contact.
2. Belt conveyor components should be transported according to the order of tail frame, middle frame and the head frame, after transporting to the designated location, please put them away as per the transportation order along the roadway.
3. Belt conveyor should be installed according to the order of head frame, middle frame, the tail frame, central line of each pulley belt conveyor should be in a straight line.
4. Belt conveyor components should meet the requirements, the anchor bolt should be fixed and tighten reliably.
5.All sorts of protection device of belt after the installation is complete, please test each protection device to make sure they are and sensitive working in good condition.
6. Please set up a bridge for walking where people go cross the belt conveyor often.
7.The electric switch protection device must be completed which should be sensitive and reliable , 8. Both the head and tail section of belt conveyor must be equipped with two fire extinguishers and fire sand box which is not less than 0.2 m3.
9. Sweeper installation must meet the production needs. Sweeper and conveyor belt surface must contact well to ensure appropriate tightness and uniform contact.
10. In the section that the roadway changes
to slope where belt waves easily to make sure the smooth transition of belt
frame, you can adjust the supporting leg of conveyor.
11. After the completion of installation, please make sure ensure all rollers and the belt are connected well in good condition, then you can test run the conveyor.
11. After the completion of installation, please make sure ensure all rollers and the belt are connected well in good condition, then you can test run the conveyor.
没有评论:
发表评论